-
* No. of bobbins: Feed in 70-120 bobbins for each time (automatically stop)
* Motor: 0.18w 220v 50Hz
* N.W: 20KG
* G.W: 22KG
* Machine volume: 0.40×0.30×0.28M
* Measurement: 0.50×0.40×0.40M
-
* No. of bobbins: Feed in 70-120 bobbins for each time (automatically stop)
* Motor: 370W , 380V
* N.W: 86KG
* G.W: 125KG
* Measurement: 440*550*1050MM
* Features: Auto offer oil system is added, uniform filling for the thread, not easy to offer the thread, more uniform pattern, more three-dimensional sense.
-
* Exterior dimensions: 400 * 510 * 1000mm
* Weight: 70kg
* Winding speed: 1400r/m
* Three-phase: Torque motor 380
* This machine can wind non-shuttle-robbin thread used for various sewing rotary shuttles. It can wind at a time 8 cylindrical lines measuring 8.5 * Φ20mm and 8.5 * Φ20mm. The winding is reasonable and even. It ranks among the hinh-tech products.
-
* Voltage& Power: 80W 220v 50Hz
* Capacity: 666m/minute
* Automatically feed bobbin;
* Thread length adjustable (It can set1-9999 meter. When finish task, it will suspend).
* Smooth and flat pattern, favorable thread arrangement; increase utilization of thread, decrease thread broken and bobbin deformation.
-
* Model: BJ-05DX
* Voltage& Power: 60 W 220v 50Hz
* Thread length adjustable(It can set1—9999meter.When finish task ,it will suspend)
* Smooth and flat pattern, favorable thread arrangement; increase utilization of thread, decrease thread broken and bobbin deformation.
* Winding threads from a bigger coil to smaller coil.
Functions of bobbin machine and common debugging methods:
Being familiar with equipment function and winding process
When buying the bobbin machine, the first step is to electric no-load test operate. The process firstly is to check whether the inspection of the bobbin machine running smoothly and whether there is abnormal noise. The debugging personnel in the process should control the bobbin machine instruction one by one checking each function is valid, and it is also a process of being familiar with the equipment. After being preliminary familiar with equipment's function according to its own products winding process, to find the corresponding equipment function, combining with the winding process to see if the function of the equipment is consistent with the requirements of the winding. Equipment function requires the detailed communication with the supplier when purchasing, avoiding the requirements of the equipment after the purchase is inconsistent with the requirements of the winding. The allowable line diameter, the maximum weight, the width of the line and the precision of the equipment should be noted, these parameters are the basic data to determine whether the equipment meets the requirements of the winding.
Equipment attachment setting and data determination
After debugging personnel being familiar with the function of equipment and parameters, it also needs to adjust the tension of the bobbin machine and winding mold data to determine. In general, the larger the diameter of the wire is used, the greater the tension is. The range of tension adjustment for the equipment of different manufacturers is different, and the tension required for the use of aluminum wire and copper wire is also different. The tension required for the same line of aluminum wire is smaller than that of the copper wire, and the tension adjustment over the assembly leads to the smaller line diameter around the die. If it is a fine line, there will be a break, a knot, and so on. If the tension is too small, the coil will be swollen and the line will be disordered. Therefore, the tension adjustment is a key setting. The width and height of the die should be noted for the determination of the winding die. Whether or not it matches the wire rod, it will affect the loading and unloading of the mold, and the loose will result in the effect of the die sloshing on the line effect.
