Date Coding Machine

Date coding machine, it can print clear characters on various plastic compound film, paper, plastic paper, aluminum foil, plastic bag, label, leather and other materials. This machine is made of high quality aluminum alloy, with beautiful and light style, simple use and convenient maintenance.

Usage: turn on the power, turn on the power switch, the power indicator will be on, turn the temperature knob clockwise to the appropriate scale, heat it for about 5-10 minutes to print the word.

1. Tape changing method

Pull out the movable organic plate on the retractable belt wheel. Pay attention to the adjusting screw on the retractable belt wheel to ensure that the paper tube of the color belt and the retractable belt wheel do not slide

2. Band spacing

The walking distance of the ribbon can be adjusted by the rotating adjusting screw of the production date marking machine.

3. Word substitution method

Loosen the fastener at the bottom of the recovered spring first, pull up by hand, and loosen the printing head upward. Then loosen the top screw of the print head. Replace the copper word with tweezers and tighten the screw.

Matters needing attention

1. When the power switch indicator of the production date code printer is not on, check whether the safety pipe is burned.

2. The temperature should be between 2 and 3, which depends on the printing material. Too high or too low will affect the printing effect.

3. Pay attention to the stop reverse of the color band when changing

4. Don't use too much force when printing

5. When replacing copper words, please pay attention to the setting sequence and height. Tighten the top screw without too much force