-
* Tape Width: 7 ~ 50mm
* Cut Length: 5 ~ 999mm, Digital Length Adjustment.
* Length setting: Digital
* Accuracy of cut: +/-1mm
* Counter Up or Down: Optional
* Tape Material: 100+ tape materials can be cut
-
* Tape Width: 5mm ~ 50mm
* Cut length: 5mm ~999mm
* Accuracy of cut: +/- 1mm
* Display: 3 digit LED
* Length setting: Digital
* Counter up or down: optional
-
* Available Tape Width: 3 ~ 25mm
* Available Cut Length: 13 ~ 60mm
* Adjusting Method: Screw
* Bobbin: Needed
* Body Material: Plastic
* Measurement & Gross Weight: 300×170×165mm 2.8kg
-
* Acceptable Tape Width: 7mm ~ 50mm
* Cut Length: 15mm ~ 999mm
* Display: 3 digit LED
* Blades good for up to over 200,000 cuts (dependent on type of material)
* Accuracy of cut length is +/– 1mm (dependent on type of material)
-
* Available Width: 5 ~ 50mm
* Available Length: 5 ~ 999mm
* Display: 3 digit LED
* Power Supply: AC110V 60Hz / AC220V 50Hz 18W
* Measurement & Weight: 218×137×150mm 3.5KG
-
* Available Width: 3 ~ 25mm
* Available Length: 9 ~ 61mm
* Power Supply: AC110V 60Hz / AC220V 50Hz
* Measurement & Weight: 150*120*250mm 2.2Kg
-
* Acceptable Tape Width: 7-50mm
* Available Cut Length: 20-999mm
* Cut Accuracy: +/-1mm
* Counter Up or Down: Optional
* Industry Served: Food, Beverage, Commodity, Medical, Chemical, Machinery & Hardware, Apparel, Automotives, Electric & Electronics, etc.
-
* Suitable for adhesive tape.
* Accepts width: 7-50mm
* Adjustable tape length: 30-999mm (1mm intervals)
* Max outside diameter: 180mm
-
* Width: 13-80mm
* Tape Size Set Limit: 40 – 9999mm
* Free Max. OD of Roll: 230mm
* Core Diameter: 3″ (76.2mm)
* Accuracy: ± 1mm
* Power supply: AC110V 60Hz / AC220V 50Hz
-
* Available Width: 38 ~ 76mm
* Max. OD of tape roll: 178mm
* Blades: Guillotine sheer blades
* Water Brushes: 2 for consistent, uniform tape wetting
* Water Bottle Capacity: 41 ounces (1.2 liters)
-
* Available width: 15-110mm, length: 50-1100mm
* Water Brushes: 2 for consistent, uniform tape wetting
* Water Bottle Capacity: 41 ounces (1.2 liters)
* Electrical Requirements: None (optional Top Heater requires electrical power)
-
* Origin:Japan
* Tape width: 12mm, 15mm, 18mm, 24mm
* Speed: 15~40 boxes/min
* Hole size: 20~50mm(±1~2mm)
* Scope of application: PP tape, PET cloth tape, Glass cloth tape, and so on.
The working principle of tape dispenser：
The tape dispenser is also called a belt cutter. It is mainly used to cut the tape up and down the blade, according to the length of the customer's needs, set the length and cut it. Tape cutting machine has sensors. The tape will drop is at the top of the sensor after being cut. If the tape is removed, the sensor will automatically immediately send a signal to no tape and will move to the next phase of the cutting. Such a process is repeated continuously, called automatic and continuous cutting.
Generally, tape dispenser has the following characteristics:
1. Tape dispenser can cut tape, adhesive paper, protective film and other materials.
2. It can hold two rolls of adhesive tape at the same time and work simultaneously.
3. The tape dispenser has the memory function. Turned on after shutdown, the original data is still saved.
4. With the function of circular shearing, it is free to set different length cycle shear and tape cutting function to cut the adhesive paper with different thickness.
5. The tape dispenser is safe, with its screen in the cutter. Once the machine is blocked, warning devices work automatically and even if the blockage is removed, the machine will not work immediately, so you must press the start key again after back to work.
6. The tape dispenser is usually designed without a roller.
The use of tape dispenser is divided into the following steps:
1. Turn off the power switch, and then open the safety cover to reach the manual rocker arm to move the frame arm.
2. Adjust the blade until the blade is clamped to the rotary disc.
3. Then remove the frame arm from the rotating disk.
4. Then pass the tape through the blade and stick it to the rotating disk.
Note: keep it in the middle of the adhesive tape and stick it to the rotating disc.
5. If you can't install the tape properly, you can repeat the steps of 1-4 to continue to install the tape dispenser.
