-
* Accuracy: ±1mm
* Speed: 40 – 60pcs per minute
* Label Width: 10 ~ 120mm
* Label Roll ID: 75mm
-
* Labeling Accuracy: ± 0.5mm (except for products & labels’ error)
* Labeling Speed: 15 to 25 pcs / min (related to products’ size)
* Applicable Products’ Size: Length: 20mm ~ 200mm; Width: 20mm ~ 150mm;Thick:0.2mm~120mm
* Applicable Label’s Size Length: 15mm ~ 200mm; Width: 20mm ~ 200mm;
-
* Labeling Accuracy: ± 0.5mm (except for products & labels’ error)
* Labeling Speed: 15 to 25 pcs / min (related to products’ size)
* Applicable Products’ Size: Length: 20mm ~ 200mm; Width: 20mm ~ 150mm;Thick:0.2mm~120mm
* Applicable Label’s Size Length: 15mm ~ 200mm; Width: 20mm ~ 200mm;
-
* Max. OD of Label Roll: 300mm;
* Air pressure: 0.4 ~ 0.6MPa;
* Power Supply: 220/110V 50/60Hz;
* Suitable for kinds of flat surface, such as square box;
* Good labeling quality, no air bubble, no ruga;
* Compact body, need not maintenance.
-
* Labeling Speed: 0-200 pcs/min
* Diameter of Bottle: 10-100mm
* Height of Bottle: 25-350mm
* Label size: Width 10-150mm Length: 15-300mm
* Max OD of Lable roll: 300mm
* Label roll ID: 75mm
-
* Drive way: Step by step motor
* Labeling Speed: 0-200 pcs/min
* Diameter of Bottle: 10-100mm
* Height of Bottle: 25-350mm
* Label size: Width 10-150mm Length: 15-300mm
Full—automatic flat bottle labeling machine is suitable to be used in many kinds of products, such as paper box, file pocket, paper file, cardboard and the labeling on the books, etc. The addition and use of different overlying mechanism can also be used for some surface labeling of the products whose surfaces tend to be smooth. Its integrated operation of the running process is as follows:
Firstly, the products waiting to be labeled are put or supplied through manual work, card splitting machine or connecting the flow line. And the conveyor belt deliveries the products and correcting mechanism like conducting bar sets them right. The products corrected will pass through the inductor with the driving of conveyor belt. After the inductor gets the signal, it will send the message to program storage which receives the signal will output signal to control the head mark, realizing the labeling function. After labeling, the products will be covered the label again through the overlying mechanism. At that time, the whole process of the overlying label will be completed. The products with a label can be collected.
The major mechanisms of full—automatic flat surface labeling machine:
1. Adjusting seat of the headmark can adjust the direction of X axis, Y axis, Z axis and R axis.
2. Headmark includes parts—collecting mechanism, roller mechanism, peeling mechanism, feeding mechanism, haulage gear, and pulling the motor.
3. The conveyor belt is used to bring the products to be labeled into the labeling area and finish it. Then to send the products out of this area.
4. Conveyor conducting bar functions as a positive effect when delivering the products.
5. Screen touch. The man-machine operation interface is used to control the opening and stopping state of the equipment, changing the debugging parameters, observing the I/O monitoring and so on.
6. Controlling the electric box is to the circuit configuration of equipment.
