-
* Applicable range: dia. 1mm-55mm
* Voltage power: 380v/1.5kw, 220v/3kw, 110v/2.2kw
* Weight: 106kg
* Capacity: 200kg – 1200kg
* Size: 62.5cm×55cm ×84cm
-
* Diameter from 1.5mm to 98mm
* This cable stripping machine is the best choice for small recycler of cable recycling.
* Cut the waste cable into 1-2 meters.
* Put the waste cable into the hole of cable stripper.
* Cable stripped will go out from another side.
-
* Diameter from 1.5mm to 98mm
* This cable stripping machine is the best choice for small recycler of cable recycling.
* Cut the waste cable into 1-2 meters.
* Put the waste cable into the hole of cable stripper.
* Cable stripped will go out from another side.
-
* Appropriate Wire Size: 1-20mm
* Daily Output: 50 – 100Kg
* Measurement: 300×220×350mm
* Net Weight: 3.0Kg
-
*Available wire diameter range:1.5mm ~ 20mm
*Motor Voltage: AC220V, 50/60HZ
*Daily Output: 50 – 300Kg
*Dimension of machine: 86cm*40cm*41cm
*Net Weight: 32Kg
*Package: Wooden case
-
*Available wire diameter range:1.5mm ~ 38mm
*Motor Voltage: AC220V, 50/60HZ
*Daily Output: 200-500Kg
*Dimension of machine: 63cm*37cm*48cm
*Net Weight: 77Kg
*Package: Wooden case
Ten matters needing attention for wire strippers：
The wire strippers are one of the tools used by the inner wire electrician, motor repairment and instrument electrician. The electrician removes the surface insulation layer of the wire head. There are three blades on the wire stripper, which are used to strip off the outer insulation layer, the intermediate metal shielding layer and the internal insulation layer respectively. The cutting depth of the blade can be realized by adjusting the hexagonal nut of the corresponding position with the screw. When it is clockwise, lift the blade and deepen the cutting depth; in the counterclockwise direction, reduce the blade and the cutting depth becomes shallow.
Precautions for use of wire strippers:
1. Do not use lightweight pliers as a hammer, or striking the handle. If it is abused, the pliers will crack and break, and the cutting edge will collapse.
2. Always lubricate the pliers and add lubricating oil on the hinges to prolong the service life and ensure the use of saving power.
3. Do not extend the length of the handle to obtain a larger shear force, but use a larger pair of pliers or bolt cutters.
4. Don't put the pliers in an overheated place, otherwise it will cause the annealing and damage the tool.
5. Pliers cannot be used on nuts and screws, and the effect of using a wrench is better, and it is not easy to damage the fastener.
6. Ordinary pliers can't cut the piano wire unless specifically designed for this function.
7. Caution warning: The rubber sleeve on the handle is to increase the comfort of using. Unless it is a specific insulated handle, these condoms are not to be protected against electricity or to be used for power work.
8. Cut with the correct Angle, without the handle of the pliers and the clamping of head, or the crimping wire by the pliers.
9. When it is cutting wires, wear goggles to protect the eyes.
10. Do not curl the steel wire with the light pliers. If the pliers are bent too thick, the pliers will be broken. A solid tool should be used.
